NuclearQuads

Your only source for subscription-free FPV timers

Pi OS Setup

Pi Imager

Use the following instructions to flash the SD card with Raspberry Pi imager.

Select the OS

If you never plan to plug in a monitor directly to the Pi, use the Lite version.

If you’re using a Pi Zero 1, Pi 1, or Pi 2, you need a 32-bit OS. Otherwise use 64-bit.

Select the options

These are the recommended options. The username must be NuclearHazard to easily complete the later setup. The Wi-Fi settings are important for boards without ethernet so you can still SSH to them.

Options