Flash NuclearHazard SD Card From Image (Windows)

Downloads

NuclearHazard 4.1.1 SD Card Image (8GB file may take a while to download)

Install and open Win32DiskImager
Browse for the downloaded SD card image and select it in the Image File section
Find which drive letter is your SD card by going to “My Computer” in the Windows file explorer, then insert your SD card to your computer and see the drive letter for the drive that just appeared (If multiple appear, you can use any of the drive letters)
Use the dropdown under Device in Win32DiskImager to select the drive letter.
Leave all other options then click “Write”
Wait 5-30 minutes for it to finish

NuclearHazard 4.1.1 SD Card Image (8GB file may take a while to download)

Open Terminal
Insert SD card into your computer
Identify SD card device name:
```
diskutil list
```
Look for your SD card (usually /dev/disk2 or similar). Verify by checking the size.
Unmount the SD card (replace diskX with your disk number):
```
diskutil unmountDisk /dev/diskX
```
Flash the image (adjust paths as needed):
```
sudo dd if=~/Downloads/nuclearhazard-4.1.1.img of=/dev/rdiskX bs=1m
```
Note: Use rdiskX instead of diskX for faster writing. Replace X with your disk number.
Wait for flashing to complete (10-30 minutes)
- No progress will show
- Press Ctrl+T to check status
- Command prompt will return when done
Eject the SD card:
```
sudo diskutil eject /dev/diskX
```